Today I wired up the four zones for the Staging Deck and Return Loops.
I had to redesign the backing board that has the Digitrax BDL168, Accu-Lites Breakout Board and PSX attached to it so that I could also fit the PSX-AR that feeds the four blocks in Zone A to the reversing loops.
The electrical board is labelled #9, this is associated with the ID address of the Digitrax BDL168. The PSX (bottom) feeds power to the BDL Zones B, C, and D. The PSX-AR feeds power to Zone A only.
I also took the opportunity to fix up the other BDL168 & SE8C and moved them so that they were clear of the Staging Yard ladder and so that the BDL also faced the fascia instead of the helix.
If you're don't love wiring just a little bit, this endeavour can get real tedious really quickly...
Next step is to wire in the track feeders at the other end of the Staging Deck...
Jas.
No comments:
Post a Comment