Favourite Photos...

Favourite Photos...
Reading Lines GP35 #3647

Middletown, Pa

Sunday, 24 March 2013

The L&T Branch gets a working grade crossing...


Last night I fully installed our Walthers - Cornerstone Cantilevered Crossing Signals.  I used a Circuitron FL2 Flasher Kit, which is installed as a manual operating crossing.
The lights are activated via a push button on the fascia, and will be operated by switch crews working this spur off the L&T Branch.
Took a little over two hours, and all that it requires now is a sound module to be installed, anyone with ideas about where to get one please let me know as I've only found one to date.
Jas...
Posted by at

5 comments:

  1. Will25 March 2013 at 12:29

    Look at ITT Products for a Grade Crossing sound unit.

    http://ittproducts.com/products.html

    ReplyDelete
    Replies
    1. JLandT Railroad13 April 2013 at 10:57

      Will thanks for advice on the ITT Products Sound module, I have it installed and operating with cantilevered crossing.

      Here is the link on YouTube. http://m.youtube.com/watch?v=HDhDrw53Oh0

      Jas...

      Delete
  2. JLandT Railroad25 March 2013 at 13:12

    Thanks Will! I'll have a look, have you used them?

    ReplyDelete
  3. Unknown31 December 2014 at 12:01

    Hi...pleaseee contact me at josephkranz@hotmail.com ..I have the walthers cantilever signal and also using a FL2...and toggle for manual operation. I cant get it to power up..can you tell me how you wired the signal to the fl2 and power pack to fl2? thanks!

    ReplyDelete
    Replies
    1. JLandT Railroad31 December 2014 at 15:03

      Hi Joseph,

      Have a look at this post it should explain it all for you, including a wiring diagram.

      http://jlandtrailroad.blogspot.com.au/2013/04/l-grade-crossing-gets-bell-sound-module.html

      Cheers, Jas...

      Delete

Subscribe to: Post Comments (Atom)