Favourite Photos...

Favourite Photos...
Reading Lines GP35 #3647

Middletown, Pa

Sunday 24 March 2013

The L&T Branch gets a working grade crossing...


Last night I fully installed our Walthers - Cornerstone Cantilevered Crossing Signals.  I used a Circuitron FL2 Flasher Kit, which is installed as a manual operating crossing.
The lights are activated via a push button on the fascia, and will be operated by switch crews working this spur off the L&T Branch.
Took a little over two hours, and all that it requires now is a sound module to be installed, anyone with ideas about where to get one please let me know as I've only found one to date.
Jas...

5 comments:

  1. Look at ITT Products for a Grade Crossing sound unit.

    http://ittproducts.com/products.html

    ReplyDelete
    Replies
    1. Will thanks for advice on the ITT Products Sound module, I have it installed and operating with cantilevered crossing.

      Here is the link on YouTube. http://m.youtube.com/watch?v=HDhDrw53Oh0

      Jas...

      Delete
  2. Thanks Will! I'll have a look, have you used them?

    ReplyDelete
  3. Hi...pleaseee contact me at josephkranz@hotmail.com ..I have the walthers cantilever signal and also using a FL2...and toggle for manual operation. I cant get it to power up..can you tell me how you wired the signal to the fl2 and power pack to fl2? thanks!

    ReplyDelete
    Replies
    1. Hi Joseph,

      Have a look at this post it should explain it all for you, including a wiring diagram.

      http://jlandtrailroad.blogspot.com.au/2013/04/l-grade-crossing-gets-bell-sound-module.html

      Cheers, Jas...

      Delete