Installed the last Showcase Miniatures- G-Type/Tri-Light lens cabinet on my scratch built - Triple Head Signal Mast.
I’ve got the process down to about an hour per head, that’s solder the magnet wires onto each 0603 LED, twist all three pairs of wires, install the 1/8” light pipes, glue the LED’s to the light pipes, and then feed the three pairs of magnet wires through the mast stem.
Last step will be to prime the lens hoods, and paint in flat black and install them onto the lens cabinets, and install the lens cabinet backs after a final check of the LED's...
No comments:
Post a Comment